Walled garden for the Social Login (web sites/domains to open)

Follow

[Please note that this article refers to an older version of the product and may be outdated. You can find the most recent guide here]

The walled garden is a list of web sites/domains that end-users are able to visit without being authenticated.
In order to correctly configure the Social Login feature, it is necessary to add web sites to the walled garden. Mainly because the authentication is directly performed on the social network website, and no password is stored or processed in our Solution.
Social Login can be configured to run with the following providers:

More detailed instructions for each supported vendor are provided below.

 

Aerohive Networks

In the Walled Garden section it is possible to configure the walled garden, that is a range of IP addresses that can be visited by end-users even without being authenticated. You can add an address or a range of addresses by clicking New as illustrated in the picture below.

You can set a single IP address or a range (by configuring the appropriate subnet mask). It is not possible to enter domain names.

 

If you have the firmware Enterprise 6.4r1

In this case you can add domain names to the walled garden, but first you need to enable the DNS ALG service, as explained in the web interface (see picture below):

The domains to open are the following:

Facebook

*facebook.com
*facebook.net
*akamaihd.net
*fbcdn.net
Foursquare

*foursquare.com
*4sqi.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

*google.com
*googleapis.com
*gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

*google.com
*googleapis.com
*gstatic.com
*googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

*instagram.com
*akamaihd.net
LinkedIn

*linkedin.com
*licdn.com
Pinterest

*pinterest.com
*pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

*twitter.com
*twimg.com
*abs.twitter.com
VKontakte

*vk.com
*oauth.vk.com
*vk.me

Otherwise
You cannot use domain names, but you can add the following IP address/subnet mask couples:

Facebook

5.178.40.0/255.255.240.0
195.27.154.0/255.255.255.0
80.150.192.0/255.255.255.0
77.67.97.0/255.255.252.0
212.119.27.0/255.255.255.128
2.16.219.0/255.248.0.0
66.171.231.0/255.255.255.0
31.13.24.0/255.255.248.0
31.13.64.0/255.255.192.0
212.245.45.0/255.255.255.0
213.254.17.0/255.255.255.0
46.33.70.0/255.255.255.0
185.8.148.0/255.255.255.0
Foursquare

The information is not available at the moment. Sorry for the inconvenience.
Google

216.239.32.0/255.255.224.0
64.233.160.0/255.255.224.0
66.249.64.0/255.255.224.0
72.14.192.0/255.255.192.0
209.85.128.0/255.255.128.0
66.102.0.0/255.255.240.0
74.125.0.0/255.255.0.0
64.18.0.0/255.255.240.0
207.126.144.0/255.255.240.0
173.194.0.0/255.255.0.0
We recommend you to add also IP address ranges of your local Google domain (e.g. google.us for USA, google.it for Italy, google.co.uk for UK, etc.).
Google+

216.239.32.0/255.255.224.0
64.233.160.0/255.255.224.0
66.249.64.0/255.255.224.0
72.14.192.0/255.255.192.0
209.85.128.0/255.255.128.0
66.102.0.0/255.255.240.0
74.125.0.0/255.255.0.0
64.18.0.0/255.255.240.0
207.126.144.0/255.255.240.0
173.194.0.0/255.255.0.0
We recommend you to add also IP address ranges of your local Google domain (e.g. google.us for USA, google.it for Italy, google.co.uk for UK, etc.).
Instagram

The information is not available at the moment. Sorry for the inconvenience.
LinkedIn

The information is not available at the moment. Sorry for the inconvenience.
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

199.16.156.0/255.255.252.0
199.59.148.0/255.255.252.0
199.96.56.0/255.255.248.0
192.133.76.0/255.255.252.0
VKontakte

87.240.128.0/255.255.224.0

 

Aruba Networks (Controller)

In the Configuration tab in the main page. under Advanced Services you have to click Stateful Firewall and then choose the Destination tab. Then create a new destination profile.

After that you can click the profile and specify all the domains included.

Then in the Configuration tab in the main page. Under Security you have to click Authentication and then choose the L3 Authentication tab.
By clicking a name of a profile you can also configure the walled garden for your device. It is necessary to add all the domain profiles created in the previous step.

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me


Aruba Networks - IAP Mode

To set up the walled garden, you must the Edit Captive WiFi > Security page in the web interface and then click the link next to the Walled garden label.


After that, add the domains to open under the Whitelist text box.


The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me
 

Cisco (Controller)

As explained in the article Cisco Systems controllers and Cloud4Wi, it is possible to implement the "walled garden" feature for this device by using ACLs.
For each IP address/subnet mask couple, it is necessary to specify two rules: one for outcoming connections, the other for incoming connections.

The following example deals with the addition of a rule for: 5.178.40.0/255.255.240.0

Rule #1:
Action
: Permit
Source IP/Mask: 5.178.40.0/255.255.240.0
Destination IP/Mask: 0.0.0.0/0.0.0.0
Protocol: Any
Source Port: Any
Dest Port: 80
DSCP: Any
Direction: Outbound

Rule #2:
Action
: Permit
Source IP/Mask: 0.0.0.0/0.0.0.0
Destination IP/Mask: 5.178.40.0/255.255.240.0
Protocol: Any
Source Port: 80
Dest Port: Any
DSCP: Any
Direction: Inbound

The IP address/subnet mask couples to add, are the following:

Facebook

5.178.40.0/255.255.240.0
195.27.154.0/255.255.255.0
80.150.192.0/255.255.255.0
77.67.97.0/255.255.252.0
212.119.27.0/255.255.255.128
2.16.219.0/255.248.0.0
66.171.231.0/255.255.255.0
31.13.24.0/255.255.248.0
31.13.64.0/255.255.192.0
212.245.45.0/255.255.255.0
213.254.17.0/255.255.255.0
46.33.70.0/255.255.255.0
185.8.148.0/255.255.255.0
Foursquare

The information is not available at the moment. Sorry for the inconvenience.
Google

216.239.32.0/255.255.224.0
64.233.160.0/255.255.224.0
66.249.64.0/255.255.224.0
72.14.192.0/255.255.192.0
209.85.128.0/255.255.128.0
66.102.0.0/255.255.240.0
74.125.0.0/255.255.0.0
64.18.0.0/255.255.240.0
207.126.144.0/255.255.240.0
173.194.0.0/255.255.0.0
We recommend you to add also IP address ranges of your local Google domain (e.g. google.us for USA, google.it for Italy, google.co.uk for UK, etc.).
Google+

216.239.32.0/255.255.224.0
64.233.160.0/255.255.224.0
66.249.64.0/255.255.224.0
72.14.192.0/255.255.192.0
209.85.128.0/255.255.128.0
66.102.0.0/255.255.240.0
74.125.0.0/255.255.0.0
64.18.0.0/255.255.240.0
207.126.144.0/255.255.240.0
173.194.0.0/255.255.0.0
We recommend you to add also IP address ranges of your local Google domain (e.g. google.us for USA, google.it for Italy, google.co.uk for UK, etc.).
Instagram

The information is not available at the moment. Sorry for the inconvenience.
LinkedIn

The information is not available at the moment. Sorry for the inconvenience.
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

199.16.156.0/255.255.252.0
199.59.148.0/255.255.252.0
199.96.56.0/255.255.248.0
192.133.76.0/255.255.252.0
VKontakte

87.240.128.0/255.255.224.0

 

Cradlepoint

Please go in the main page of your local AP interface or the Cradlepoint ECM and click the System Settings menu dropdown. Then choose your hotspot service, scroll down to Allowed hosts/domains prior to Authentication and click on Add in order to insert a new domain.
 
it is necessary to add the following domains:
Facebook

*.facebook.com
*.facebook.net
*.akamaihd.net
*.fbcdn.net
Foursquare

*.foursquare.com
*.4sqi.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

*.google.com
*.googleapis.com
*.gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

*.google.com
*.googleapis.com
*.gstatic.com
*.googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

*.instagram.com
*.akamaihd.net
LinkedIn

*.linkedin.com
*.licdn.com
Pinterest

*.pinterest.com
*.pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

*.twitter.com
*.twimg.com
VKontakte

*.vk.com
*.vk.me

 

DD-WRT

In the Services > Hotspot menu, it is necessary to enable Chillispot and set the walled garden in the UAM Allowed field. You must enter a value, or a set of comma-separated values. Since Chillispot does not support domain names, it is necessary to enter IP addresses ranges.b



The IP addresses ranges to enter are the following:

Facebook

5.178.40.0/20
195.27.154.0/24
80.150.192.0/24
77.67.97.0/22
212.119.27.0/25
2.16.219.0/13
66.171.231.0/24
31.13.24.0/21
31.13.64.0/18
212.245.45.0/24
213.254.17.0/24
46.33.70.0/24
185.8.148.0/24
Foursquare

The information is not available at the moment. Sorry for the inconvenience.
Google

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

The information is not available at the moment. Sorry for the inconvenience.
LinkedIn

The information is not available at the moment. Sorry for the inconvenience.
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

199.16.156.0/22
199.59.148.0/22
199.96.56.0/21
192.133.76.0/22
VKontakte

87.240.128.0/19

 

Deliberant

In order to set up the walled garden, it is necessary first to access the Configuration > Wireless section and scroll down until the White list section is visible.

Then, it is necessary to add the following domains:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

Please don't forget that it is mandatory to add "cloud4wi.com".

 

Endian

In order to set up the walled garden, it is necessary to access the HotSpot Settings section in the HotSpot top menu, select the Enable HotSpot option and then fill the Allowed Sites / Access section.

Then, it is necessary to add the following domains:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me
 

EnGenius

In order to configure the walled garden it is necessary to enter the System > Hotspot Configuration page and then insert a whitespace-separated list of domains enclosed by quotation mark characters (" ") in the row where "HS_UAMALLOW" and "HS_UAMDOMAINS" attributes are.
Then you have to click Submit and reboot the device in menu System > Reboot.

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me
 

 

Hewlett Packard (Cloud managed)

In Wireless Configuration > Networks, in the Security Tab, you can find the Walled Garden section. Here you can set the list of hosts or IP address ranges that are allowed to unauthenticated end-users.

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

 

Hewlett Packard (MSM series)

Please click Public access > Attributes > Configure Attributes on the top menu, to see the list of the existing RADIUS profiles. Choose your profile and add one "ACCESS-LIST" attribute for each URL exception that you are going to create. The value of the attribute is the following:

cloud4wi,ACCEPT,all,WALLEDGARDEN_URL,all

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me
 

Example
If you want to configure the walled garden list for Facebook, you have to add the following entries:

Attribute Value
ACCESS-LIST cloud4wi,ACCEPT,all,facebook.com,all
ACCESS-LIST cloud4wi,ACCEPT,all,facebook.net,all
ACCESS-LIST cloud4wi,ACCEPT,all,akamaihd.net,all
ACCESS-LIST cloud4wi,ACCEPT,all,fbcdn.net,all

For Google+, we recommend you to add also your local Google domain (e.g. "google.us" for USA, "google.it" for Italy, "google.co.uk" for UK, etc.).

 

Icomera Moovbox

In order to configure the walled garden, it is necessary to click Bridge Groups in the Configuration left-side menu, then click Edit in the row of Access Point and then click the Edit Captive Portal button.
The UAM Allowed List field is where we can set the configuration of the walled garden: here it is necessary to enter a value, or a set of comma-separated values. Domain names are not supported and so it is necessary to enter IP addresses ranges.

The IP address ranges to enter are the following:

Facebook

5.178.40.0/20
195.27.154.0/24
80.150.192.0/24
77.67.97.0/22
212.119.27.0/25
2.16.219.0/13
66.171.231.0/24
31.13.24.0/21
31.13.64.0/18
212.245.45.0/24
213.254.17.0/24
46.33.70.0/24
185.8.148.0/24
Foursquare

The information is not available at the moment. Sorry for the inconvenience.
Google

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

The information is not available at the moment. Sorry for the inconvenience.
LinkedIn

The information is not available at the moment. Sorry for the inconvenience.
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

199.16.156.0/22
199.59.148.0/22
199.96.56.0/21
192.133.76.0/22
VKontakte

87.240.128.0/19

 

LigoWave VAC/LAC

In order to configure “Walled Garden” for social network, create access-rule for application in access policy. For this example, create access-rule with criteria to match domain-name of corresponding social website. Depending on customer location different domain and sub-domain need to be added under access rule.
The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
static.xx.fbcdn.ne
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
api.linkedin.com
static.licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twimg.com
api.twitter.com

VKontakte

vk.com
oauth.vk.com
vk.me

Click Rights > Rights > Access Rules and add new rule. See screenshot below showing procedure to add facebook domain for social login.

Below screenshot list some common domain names defined under Access Rules.

Click Rights > Rights > Access Policy to add a new Access Policy and select corresponding Access rule that will allow user to website prior pre-authentication.

Click Rights > Rights > Rights Policy to assign newly created Access policy to your Splash Portal. See below screenshot for reference.

 

Meraki

In order to get the best possible support to the Social Login feature, it is necessary to make a request to Meraki asking for the activation of walled garden feature. This will allow to open not only hostnames to end-users, but even IP address ranges (by using CIDR notation) and subdomains (by using domain wildcards).

After the activation of this feature, a tip below the walled garden input will indicate the right syntax to enter new domains.

First of all, it is mandatory to add the Splash Portal URL into this list (see Meraki - MR series), otherwise the end-user will not be able to visit the authentication page.
Then, in the case of Social Login, you must add the following entries:

Facebook

*.facebook.com
*.facebook.net
*.akamaihd.net
*.fbcdn.net
Foursquare

*.foursquare.com
*.4sqi.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

*.google.com
*.googleapis.com
*.gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

*.google.com
*.googleapis.com
*.gstatic.com
*.googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

*.instagram.com
*.akamaihd.net
LinkedIn

*.linkedin.com
*.licdn.com
Pinterest

*.pinterest.com
*.pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

*.twitter.com
*.twimg.com
VKontakte

*.vk.com
*.vk.me

 

Mikrotik

In the IP > Hotspot menu, it is necessary to open the Walled Garden tab and specify which sites the end-user will be able to visit without being authenticated.
It is mandatory to add the Splash Portal URL into this list (see Mikrotik), otherwise the end-user will not be able to visit the authentication page. Furthermore, you must allow the following Dst. Host values:

Facebook

*facebook*
*akamai*
*fbcdn*
Foursquare

*foursquare*
*4sqi*
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

*google*
*googleapis*
*gstatic*
Google+

*google*
*googleapis*
*gstatic*
Instagram

*instagram*
LinkedIn

*linkedin*
*licdn*
Pinterest

*pinterest*
*pinimg*
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

*twitter*
*twimg*
VKontakte

*vk.com
*oauth.vk.com
*vk.me


The configuration specified in the picture below refers to this configuration:
mikrotik_walled_garden.png

Nomadix

it is possible to set the list of web sites allowed for unauthenticated end-users by accessing the Configuration > Pass through Address Settings section. To enable this configuration, check the Passthrough Addresses - Enable option.
Each URL can be added to this list by entering the correct value in the appropriate box and then clicking the Add button, and it must be entered without the http:// prefix (for example: www.facebook.com is correct; http://www.facebook.com/ is not correct).
To remove the URL that was previously added, re-enter it and then click the Remove button.


The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

 

Open-Mesh

In order to set up the Hotspot, it is necessary to access the SSID #1 section (or alternatively, the SSID #2 section) in the web interface and then add the Splash Portal URL and all the necessary domains separated by commas, as indicated below. It is also necessary to select Chillispot Compatible checkbox.



The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

 

Power Cloud Systems

In the Walled Garden section, for the selected zone, it is possible to set some hosts or IP address ranges that can be visited by end-users even without being authenticated. Below is the correct configuration in order to support Social Login with Power Cloud Systems devices.


The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

 

Ruckus Wireless - Controller Mode

The walled garden can be configured by selecting the Configure tab in the main menu, accessing the Hotspot Service section and then selecting the Walled Garden subsection.


 

Note:
It is strongly recommended to update devices to the last firmware version available: in fact, by using the version 9.8 or later of the firmware, it is possible to enter wildcard domains in the walled garden, making configuration easier.

The domains to open, for version 9.8 or later, are the following:

Facebook

*.facebook.com
*.facebook.net
*.akamaihd.net
*.fbcdn.net
Foursquare

*.foursquare.com
*.4sqi.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

*.google.com
*.googleapis.com
*.gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

*.google.com
*.googleapis.com
*.gstatic.com
*.googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

*.instagram.com
*.akamaihd.net
LinkedIn

*.linkedin.com
*.licdn.com
Pinterest

*.pinterest.com
*.pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

*.twitter.com
*.twimg.com
VKontakte

*.vk.com
*.vk.me

 

For older versions, IP address ranges to enter are the following:

Facebook

5.178.40.0/20
195.27.154.0/24
80.150.192.0/24
77.67.97.0/22
212.119.27.0/25
2.16.219.0/13
66.171.231.0/24
31.13.24.0/21
31.13.64.0/18
212.245.45.0/24
213.254.17.0/24
46.33.70.0/24
185.8.148.0/24
Foursquare

The information is not available at the moment. Sorry for the inconvenience.
Google

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

The information is not available at the moment. Sorry for the inconvenience.
LinkedIn

The information is not available at the moment. Sorry for the inconvenience.
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

199.16.156.0/22
199.59.148.0/22
199.96.56.0/21
192.133.76.0/22
VKontakte

87.240.128.0/19

 

Ruckus Wireless - Standalone Mode

Please access the Configuration :: Hotspot section and click the Walled Garden button.

Then click the Add new entry button.

Then you can add the walled garden. The IP address ranges to enter are the following:

Facebook

5.178.40.0/20
195.27.154.0/24
80.150.192.0/24
77.67.97.0/22
212.119.27.0/25
2.16.219.0/13
66.171.231.0/24
31.13.24.0/21
31.13.64.0/18
212.245.45.0/24
213.254.17.0/24
46.33.70.0/24
185.8.148.0/24
Foursquare

The information is not available at the moment. Sorry for the inconvenience.
Google

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

216.239.32.0/19
64.233.160.0/19
66.249.64.0/19
72.14.192.0/18
209.85.128.0/17
66.102.0.0/20
74.125.0.0/16
64.18.0.0/20
207.126.144.0/20
173.194.0.0/16
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

The information is not available at the moment. Sorry for the inconvenience.
LinkedIn

The information is not available at the moment. Sorry for the inconvenience.
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

199.16.156.0/22
199.59.148.0/22
199.96.56.0/21
192.133.76.0/22
VKontakte

87.240.128.0/19

 

Ruckus Wireless SmartCell Gateway

By clicking the Configuration menu link, clicking on AP Zones and then WISPr (Hotspot) in the left sidebar, you can see the Walled Garden section.
The IP addresses ranges to enter are the following:

Facebook

*.facebook.com
*.facebook.net
*.akamaihd.net
*.fbcdn.net
Foursquare

*.foursquare.com
*.4sqi.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

*.google.com
*.googleapis.com
*.gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

*.google.com
*.googleapis.com
*.gstatic.com
*.googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

*.instagram.com
*.akamaihd.net
LinkedIn

*.linkedin.com
*.licdn.com
Pinterest

*.pinterest.com
*.pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

*.twitter.com
*.twimg.com
VKontakte

*.vk.com
*.vk.me

 

Samsung Controller

You can use domain names in the walled garden. The example below creates access-rule with criteria to match domain-name for the corresponding social website. Depending on the customer location, different domain and sub-domain need to be added under access rule.

 The domains to open are the following:

Facebook

www.facebook.com
static.xx.fbcdn.net
www.fbcdn.net
Foursquare

www.foursquare.com
4sqi.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the Walled Garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
googleusercontent.com
accounts.google.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
accounts.google.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

www.instagram.com
instagramstatic-a.akamaihd.net
LinkedIn

linkedin.com
licdn.com
api.linkedin.com
static.licdn.com
Pinterest

www.pinterest.com
s-passets-cache-ak0.pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the Walled Garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
abs.twimg.com
abs-0.twimg.com
api.twitter.com
VKontakte

The information is not available at the moment. Sorry for the inconvenience.

 

Tanaza

In order to configure the walled garden, it is necessary to access the Configure > SSID page in the web interface and then click the name of the SSID that will be used as Hotspot.
Then it is necessary to select the Wireless Security tab and to add the domains to open in the Add custom domain/ip field.

 

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

 

Teldat

You can add the walled garden through your command line. The IP address ranges to enter are the following:

Facebook

5.178.40.0/255.255.240.0
195.27.154.0/255.255.255.0
80.150.192.0/255.255.255.0
77.67.97.0/255.255.252.0
212.119.27.0/255.255.255.128
2.16.219.0/255.248.0.0
66.171.231.0/255.255.255.0
31.13.24.0/255.255.248.0
31.13.64.0/255.255.192.0
212.245.45.0/255.255.255.0
213.254.17.0/255.255.255.0
46.33.70.0/255.255.255.0
185.8.148.0/255.255.255.0
Foursquare

The information is not available at the moment. Sorry for the inconvenience.
Google

216.239.32.0/255.255.224.0
64.233.160.0/255.255.224.0
66.249.64.0/255.255.224.0
72.14.192.0/255.255.192.0
209.85.128.0/255.255.128.0
66.102.0.0/255.255.240.0
74.125.0.0/255.255.0.0
64.18.0.0/255.255.240.0
207.126.144.0/255.255.240.0
173.194.0.0/255.255.0.0
We recommend you to add also IP address ranges of your local Google domain (e.g. google.us for USA, google.it for Italy, google.co.uk for UK, etc.).
Google+

216.239.32.0/255.255.224.0
64.233.160.0/255.255.224.0
66.249.64.0/255.255.224.0
72.14.192.0/255.255.192.0
209.85.128.0/255.255.128.0
66.102.0.0/255.255.240.0
74.125.0.0/255.255.0.0
64.18.0.0/255.255.240.0
207.126.144.0/255.255.240.0
173.194.0.0/255.255.0.0
We recommend you to add also IP address ranges of your local Google domain (e.g. google.us for USA, google.it for Italy, google.co.uk for UK, etc.).
Instagram

The information is not available at the moment. Sorry for the inconvenience.
LinkedIn

The information is not available at the moment. Sorry for the inconvenience.
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

199.16.156.0/255.255.252.0
199.59.148.0/255.255.252.0
199.96.56.0/255.255.248.0
192.133.76.0/255.255.252.0
VKontakte

87.240.128.0/255.255.224.0

 

Ubiquiti Networks

In order to configure the walled garden, you must access the Services page in the web interface, and then click the Setup link in the CoovaChilli Hotspot section. Then enter all values, comma separated, in the UAM Allow Domains input field.

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

 

Wi-Next

In order to set up the walled garden, it is necessary to access the Services > Hotspot page in the web interface and add the domains in the Url allowed field.

1.png

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
Pinterest

pinterest.com
pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

twitter.com
twimg.com
abs.twitter.com
VKontakte

vk.com
oauth.vk.com
vk.me

 

Xclaim

In order to configure “Walled Garden” for social network, create access-rule for application in access policy. For this example, create access-rule with criteria to match domain-name of corresponding social website. Depending on customer location different domain and sub-domain need to be added under access rule.

The domains to open are the following:

Facebook

facebook.com
facebook.net
akamaihd.net
fbcdn.net
Foursquare

foursquare.com
4sqi.net
doubleclick.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

google.com
googleapis.com
gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

google.com
googleapis.com
gstatic.com
googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

instagram.com
akamaihd.net
LinkedIn

linkedin.com
licdn.com
api.linkedin.com
static.licdn.com
Pinterest

The information is not available at the moment. Sorry for the inconvenience.
Twitter

twitter.com
twimg.com
abs.twimg.com
api.twitter.com
VKontakte

The information is not available at the moment. Sorry for the inconvenience.

 

Xirrus

In the Array AP you can find the WPR Whitelist Configuration section on SSID > SSID Management.

The domains to add are the following:

Facebook

*.facebook.com
*.facebook.net
*.akamaihd.net
*.fbcdn.net
Foursquare

*.foursquare.com
*.4sqi.net
In the login box displayed during the login, it is possible to connect a Foursquare account to an existing Facebook account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook.
Google

*.google.com
*.googleapis.com
*.gstatic.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Google+

*.google.com
*.googleapis.com
*.gstatic.com
*.googleusercontent.com
We recommend you to add also your local Google domain (e.g. "*google.us" for USA, "*google.it" for Italy, "*google.co.uk" for UK, etc.).
Instagram

*.instagram.com
*.akamaihd.net
LinkedIn

*.linkedin.com
*.licdn.com
Pinterest

*.pinterest.com
*.pinimg.com
In the login box displayed during the login, it is possible to connect a Pinterest account to an existing Facebook, Google+ or Twitter account. In order to allow this operation, it is necessary to add also the walled garden entries for Facebook, Google+ or Twitter.
Twitter

*.twitter.com
*.twimg.com
VKontakte

*.vk.com
*.vk.me

 

Twitter's API update

It is now necessary to add the entire "twitter.com" domain, instead of the previous "api.twitter.com".

Have more questions? Submit a request

Comments